EverRoof Sustainable Roof Systems To Restore and Protect
702.966.9961
 
EVER-THANE® ACCELERATOR - SINGLE-COMPONENT LIQUID THICKENER / ACCELERATOR
 

EVER-THANE® Accelerator is a single-component, liquid thickener / accelerator for EVER-THANE® Base and EVER-THANE® White which are part of EVERROOF®'s Cool Roof Systems. This accelerator accelerates cure time and causes the coating to thicken and to cure faster.

Download Datasheet
Download Datasheet
 

FEATURES & BENEFITS

EVER-THANE® Accelerator allows the coating material to have a faster cure time without compromising manageability when time is of the essence. EVER-THANE® Accelerator can save on time and labor costs.
• Fast cure time
• Saves in labor cost apply two coats in one day

TYPICAL USES

EVER-THANE® Accelerator can be used when needed on vertical surfaces, and other areas where quick cure is needed.

SAFETY

Review the Material Safety Data Sheets (MSDS) and container labels for detailed health and safety information. This product is intended for industrial use by properly trained professional applicators only.
TYPICAL PROPETRIES
Packaging

1 qt. (0.95L)
Color Amber
Shelf Life 1 year
Pot Life at 75F (24C), 50% RH 20 40 minutes
Total Solids by Weight, ASTM D-2369) 100%
Total Solids by Volume, ASTM D-2697) 100%
Specific Gravity 0.98
Viscosity at 75F (24C) 100 50 cps
Volatile Organic Compounds, ASTM D-2369-81 0 lb/gal, 0 gm/liter

DIRECTIONS FOR USE

EVER-THANE® Accelrator may be mixed into EVER-THANE® Base and EVERTHANE® White. Mix coating material thoroughly then add and mix EVER-THANE® Accelerator into the coating material until a homogeneous mixture and color is obtained. Mix for at least 3 - 5 minutes. The mixing ratio of EVER-THANE® Accelerator to coating material is: 1 pint to 5 gallons of coating material (.47 liter to 18.93 liter). The pot life of the resulting thixotropic compound is approximately 20 to 40 minutes at 75F (24C) and 50% relative humidity.
Limitations:
• Excessive EVER-THANE® Accelerator will result in a   reduction of the physical properties of the base   membrane
• Not UV stable
• Cannot withstand direct wear or abrasion
• After mixing material must be used within 15-20   minutes
• Do not dilute under any circumstance

STORAGE & HANDLING

Keep containers closed, store in a dry, cool place away from heat, sparks, open flame, excessive heat, and moisture. Keep material stored above 65F (18C). Open containers should be blanketed with dry nitrogen before resealing.
Copyright @ 2014 Ever Performance Polymers Corp., All Rights Reserved