EverRoof Sustainable Roof Systems To Restore and Protect
702.966.9961
 
EVER-THANE® WHITE - SINGLE-COMPONENT, AROMATIC URETHANE, COOL ROOF TOP COAT
  EVER-THANE® WHITE is a versatile, multi-purpose aromatic single-component, moisture-cure liquid urethane coating designed for use as a top coat or for repair work on a variety of mature roof systems: spray polyurethane foam, single ply, metal, built up roofs, and modified bitumen.
Download Datasheet
Download Datasheet
 
FEATURES & BENEFITS
• Easy to Apply
• Durable
• Cost-Effective
• Ideal for Spot Repairs
• Good Chemical Resistance
EVER-THANE® WHITE provides a host of advantages. It is quick, easy to apply, and saves on labor. As a maintenance coating, it can be used to coat an entire roof system, to make spot repairs, or to provide additional protection when integrated with a reinforcement fabric.
TYPICAL USES
EVER-THANE® WHITE can be applied to aged or cured single-ply, metal, spray polyurethane foam, built-up roofs, or modified bitumen roof systems either as part of a complete roof system or as part of a maintenance or repair program.
COLOR
White
TYPICAL PROPERTIES
Coverage Rate 1.5 gal / 100 sq. ft.
Color White
Shelf Life 6 mos. (unopened container)
Wet Film Thickness (1.5 gal / 100 sq. ft.) 24 mils (609.6 microns)
Hardness, ASTM D-2240 80 2%
Tear Resistance, ASTM D-624 105 lbs./in.
Tensile Strength, ASTM D-412 1550 psi
Elongation, ASTM D-412 365%
Specific Gravity 1.47 lb./gal.
Total Solids by Weight, ASTM D-2369 85 2%
Total Solids by Volume, ASTM D-2697 81 2%
Viscosity at 77F (25C) 5000 7000 cps
Volatile Organic Compounds, ASTM D-2369-81 48 g/L
Thermal Reflectivity 0.90
Solar Emittance 0.79
SRI 99
MIXING
Review all technical data sheets, system sheets, labels, instructions, MSDS, and Guide Specifications before mixing and applying. Mix 55 gallon (208.2L) drums and 5 gallon (18.93L) pails with a variable speed drill utilizing a jiffy mixer to suspend any settled pigments until a uniform color and consistency is achieved. Mixing time will vary based on temperature and atmospheric conditions.
APPLICATION
Prior to coating any surface, be sure the coating will adhere by performing an adhesion test (ASTM D-903). Coating may be applied by brush, roller, or airless spray equipment. Do not apply when temperatures are below 40F (4.4C) or when precipitation is in the forecast within 48 hours. Spray application is not recommended below 50F (10C). In areas where the roof is subject to foot traffic, it is recommended to apply walkway pads for a granule surface the roof is subject to foot traffic, it is recommended to apply walkway pads for protection and slip resistance
STORAGE & HANDLING
Keep containers closed, store in a dry, cool place away from heat, sparks, open flame and moisture. Keep material stored above 65F (18C). Open containers should be blanketed with dry nitrogen before resealing.
Copyright @ 2014 Ever Performance Polymers Corp., All Rights Reserved